Fixed compile-errors

Removed avrdude (incomplete)

Geigerzaehler/AVRdude/arduino_32u4.bat

@@ -1,6 +0,0 @@
-@echo off
-SET port=%1%
-C:\AVRdude\avrdude.exe -patmega32u4 -cavr109 -PCOM%port% -b1200 -n
-SET /a port=%port%-1
-ping -n 2 127.0.0.1 > NUL
-C:\AVRdude\avrdude.exe -patmega32u4 -cavr109 -PCOM%port% -b57600 -D -Uflash:w:%2%:i

Geigerzaehler/AVRdude/config_atmel_studio.txt

@@ -1,36 +0,0 @@
-Title:		Arduino Uno
-Command:	C:\AVRdude\avrdude.exe
-Arguments:	-patmega328p -carduino -P\\.\COM6 -b115200 -D -Uflash:w:"$(ProjectDir)Debug\$(TargetName).hex":i
-
-
-Title:		Arduino Mega
-Command:	C:\AVRdude\avrdude.exe
-Arguments:	-patmega2560 -cwiring -P\\.\COM7 -b115200 -D -Uflash:w:"$(ProjectDir)Debug\$(TargetName).hex":i
-
-
-Title:		Arduino Nano
-Command:	C:\AVRdude\avrdude.exe
-Arguments:	-patmega328p -cwiring -P\\.\COM15 -b115200 -D -Uflash:w:"$(ProjectDir)Debug\$(TargetName).hex":i
-
-Title:		Arduino Leonardo/Micro/Esplora
-Command:	C:\AVRdude\arduino_32u4.bat
-Arguments:	8 $(ItemDir)Debug\$(TargetName).hex
-
-und mit manuellem Reset:
-
-Command:	C:\AVRdude\avrdude.exe
-Arguments:	-patmega32u4 -cavr109 -P\\.\COM6 -b57600 -D -Uflash:w:"$(ProjectDir)Debug\$(TargetName).hex":i
-
-Title:		Digispark
-Command:	C:\AVRdude\micro_batch.bat
-Arguments:	$(ProjectDir)Debug\$(TargetName).hex
-
-Title:		USBasp
-Command:	C:\AVRdude\avrdude.exe
-Arguments:	-patmega328p -cusbasp -Uflash:w:"$(ProjectDir)Debug\$(TargetName).hex":i
-				^
-				|
-				Hier aufpassen das man den richtigen MCU gewählt hat!
-
-Title:		DigiX
-Command:	C:\AVRdude\bossac.exe

Geigerzaehler/AVRdude/micro_batch.bat

@@ -1,3 +0,0 @@
-@echo off
-echo Bitte Digispark anschliessen...(in 60 Sekunden automatischer Abbruch)
-micronucleus.exe --run --type intel-hex %1%

Geigerzaehler/main.c

@@ -30,7 +30,7 @@ uint16_t signalOutput_led_nextTick		=	0;
 
 // Prescaling of timer [timer-speed: cpu-clock / prescaler]
 // Modes: [1, 8, 64, 256, 1024]
-uint8_t timer1_prescaler = 256;
+uint16_t timer1_prescaler = 256;
 uint16_t timer1_overflow_value = (2^16) -1;	// Just for info
 
 int main()
@@ -59,6 +59,8 @@ int main()
 	// Init timer1
 	timer1_init();
 	
+	PORTB |= (1 << PORTB5);	// Onboard-Led
+	
 	// Endless loop
     while (1) 
     {
@@ -181,11 +183,10 @@ ISR(INT0_vect)
 		// Reached ~400V, deactivate booster
 		boost_highVoltage_nextTick = 0;
 		
-		PORTB |= (0 << PORTB5);	// Onboard-Led
-		
 		// reset state
 		PORTD |= (0 << PORTD4);			// pin on low
-		boost_highVoltage_nextHigh = 1;	// next is high
+		
+		PORTB |= (0 << PORTB5);	// Onboard-Led
 	}
 	
 	reti();		// Exit interrupt-handler
@@ -196,7 +197,8 @@ ISR(INT0_vect)
 ISR(INT1_vect)
 {
 	// Tick detected, signalOutput
-	signalOutput_nextTick = 1;	//  Run as soon as possible
+	signalOutput_piezo_nextTick = 1;	//  Run as soon as possible
+	signalOutput_led_nextTick = 1;
 	
 	reti();		// Exit interrupt-handler
 }