Set frequency to 10kHz

Fixed timer1_overflow_value not being correctly calculated

Geigerzaehler/main.c

@@ -19,7 +19,7 @@
  * Global variable declaration
  */
 // Set frequencys and general stuff
-uint16_t boost_frequency		= 2000;		// 2kHz frequency
+uint16_t boost_frequency		= 10000;		// 10kHz frequency
 uint16_t signalOutput_piezo_time	= 200;		// 200ms
 uint16_t signalOutput_led_time		= 200;		// 200ms
 
@@ -31,7 +31,7 @@ uint16_t signalOutput_led_nextTick		=	0;
 // Prescaling of timer [timer-speed: cpu-clock / prescaler]
 // Modes: [1, 8, 64, 256, 1024]
 uint16_t timer1_prescaler = 256;
-uint16_t timer1_overflow_value = (2^16) -1;	// Just for info
+uint16_t timer1_overflow_value = 65535;	// For calculations
 
 int main()
 {
@@ -59,7 +59,7 @@ int main()
 	// Init timer1
 	timer1_init();
 	
-	PORTB |= (1 << PORTB5);	// Onboard-Led
+	PORTB |= (boost_highVoltage_nextTick << PORTB5);	// Onboard-Led
 	
 	// Endless loop
     while (1) 
@@ -77,7 +77,7 @@ int main()
 				PORTD ^= (1 << PORTD4);
 				
 				// Calculate when next high/low should be set
-				boost_highVoltage_nextTick = (uint16_t)TCNT1 + F_CPU/timer1_prescaler * 1/(boost_frequency/2);		// Half of time it should be high/low
+				boost_highVoltage_nextTick = (uint16_t)TCNT1 + F_CPU/timer1_prescaler * 1/boost_frequency/2;		// Half of time it should be high/low
 				if(boost_highVoltage_nextTick == 0) boost_highVoltage_nextTick++;		// If its 0, it stops, we dont want that
 			}
 		}
@@ -91,7 +91,7 @@ int main()
 			if((uint16_t)TCNT1 >= signalOutput_piezo_nextTick && ((uint16_t)TCNT1-signalOutput_piezo_nextTick) < (timer1_overflow_value/2))	// If we are on or after the tick it should be executed
 			{
 				// Flip pin state
-				PORTD ^= (1 << PORTD5);
+ 				PORTD ^= (1 << PORTD5);
 				
 				if(!(PIND & (1 << PORTD5)))
 				{
@@ -174,7 +174,8 @@ ISR(INT0_vect)
 	if(!(PIND & (1 << PORTD2)))	// Falling edge
 	{	
 		// Below ~400V, activate booster
-		boost_highVoltage_nextTick = 1;	//  Run as soon as possible
+		boost_highVoltage_nextTick = TCNT1;	//  Run as soon as possible
+		PORTB |= (1 << PORTB5);	// Onboard-Led
 		
 		PORTB |= (1 << PORTB5);	// Onboard-Led
 	}
@@ -183,10 +184,10 @@ ISR(INT0_vect)
 		// Reached ~400V, deactivate booster
 		boost_highVoltage_nextTick = 0;
 		
+		PORTB |= (0 << PORTB5);	// Onboard-Led
+		
 		// reset state
 		PORTD |= (0 << PORTD4);			// pin on low
-		
-		PORTB |= (0 << PORTB5);	// Onboard-Led
 	}
 	
 	reti();		// Exit interrupt-handler
@@ -197,8 +198,8 @@ ISR(INT0_vect)
 ISR(INT1_vect)
 {
 	// Tick detected, signalOutput
-	signalOutput_piezo_nextTick = 1;	//  Run as soon as possible
-	signalOutput_led_nextTick = 1;
+	signalOutput_piezo_nextTick = TCNT1;	//  Run as soon as possible
+	signalOutput_led_nextTick = TCNT1;
 	
 	reti();		// Exit interrupt-handler
 }